{"title":"Zapco Z-AT Series","description":"\u003ch3 style=\"text-align: center;\"\u003eThe Zapco Z-AT Series — extreme SQ competition Class-AB amplifiers in mono, 2-channel and 4-channel, plus the Z-ST200A voltage stabilizer. Built for sound quality competitors and high-end daily builds. \u003cbr\u003eAuthorized Zapco dealer. Sold and professionally installed at Mediocre Customs in Cary, IL.\u003c\/h3\u003e","products":[{"product_id":"z-st200a-at","title":"Zapco Z-ST200A AT 200A Voltage Stabilizer with Remote Display - Installed at Mediocre Customs, Cary IL","description":"\u003cp\u003e\u003cstrong\u003eInstalled at Mediocre Customs, Cary IL.\u003c\/strong\u003e We install it at our Cary shop as part of your system, so it's set up right the first time.\u003c\/p\u003e\u003cp\u003eThe Zapco Z-ST200A AT is a voltage stabilizer and regulator for car audio systems. It sits between your battery and your amplifiers and holds their supply at a steady, adjustable voltage from 12 V to 18 V, delivering up to 200 A of current. It does not make sound or add wattage itself; Zapco's 3000 W RMS rating is how much power it can feed to the amplifiers in your system. Zapco says a system running at a regulated 14.4 V gains about 50% more power, which shows up as better dynamics. Set the output carefully: running at the top of the range can damage amplifiers not rated for it.\u003c\/p\u003e\u003cp\u003ePart of the Zapco Z-AT Series, alongside the \u003ca href=\"\/products\/zapco-z-cb100f\"\u003eZ-CB100F AT capacitor bank\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eHighlights\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFeeds up to 200 A to your amplifiers (Zapco rating: 3000 W RMS supply capacity)\u003c\/li\u003e\n\u003cli\u003eAdjustable regulated output, 12 V – 18 V\u003c\/li\u003e\n\u003cli\u003eWide 9 V – 19 V DC input range\u003c\/li\u003e\n\u003cli\u003eDash-mount LED remote for voltage control\u003c\/li\u003e\n\u003cli\u003eFan cooling with thermal protection at 85°\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBest for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompetition and high-power systems that need a steady supply voltage\u003c\/li\u003e\n\u003cli\u003eKeeping amplifier output consistent when the charging system sags\u003c\/li\u003e\n\u003cli\u003ePairing with the Z-CB100F AT capacitor bank for transient demand\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply capacity (power fed to amplifiers)\u003c\/th\u003e\n\u003ctd\u003e3000 W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax output current\u003c\/th\u003e\n\u003ctd\u003e200 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e9 V – 19 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOutput voltage\u003c\/th\u003e\n\u003ctd\u003e12 V – 18 V, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage regulation\u003c\/th\u003e\n\u003ctd\u003eDash LED remote\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThermal protection\u003c\/th\u003e\n\u003ctd\u003e85°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling\u003c\/th\u003e\n\u003ctd\u003eFans\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (mm)\u003c\/th\u003e\n\u003ctd\u003e324 x 190 x 62\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/8093\/1047\/files\/Zapco_Z-ST200A_AT_Manual.pdf?v=1793946707\" target=\"_blank\"\u003eDownload the Zapco Z-ST200A AT user manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eProfessional install at Mediocre Customs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInstalled and wired as part of your system\u003c\/li\u003e\n\u003cli\u003eChecked and set up with the rest of your gear\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTypical install time:\u003c\/strong\u003e Usually added to a bigger install\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVehicles we do this in:\u003c\/strong\u003e Any vehicle we're building a system for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuy online, pick up and install in store.\u003c\/strong\u003e \u003ca href=\"\/pages\/contact\"\u003eMessage us\u003c\/a\u003e to discuss your build and book your install.\u003c\/p\u003e\u003ch2\u003eQuestions we get in the shop\u003c\/h2\u003e\u003ch3\u003eCan I buy it online and have you install it?\u003c\/h3\u003e\u003cp\u003eYes. Order here, pick in-store pickup, and we hold it for your install day. You can also buy it at the counter.\u003c\/p\u003e\u003ch3\u003eWill this work with my setup?\u003c\/h3\u003e\u003cp\u003eMessage us with what you're running and we'll confirm it's the right part.\u003c\/p\u003e\u003ch3\u003eCan you install it with the rest of my system?\u003c\/h3\u003e\u003cp\u003eYes. Most customers add it to a speaker or amp install.\u003c\/p\u003e\u003ch2\u003eWhy buy from Mediocre Customs\u003c\/h2\u003e\u003cp\u003eWe're an authorized Zapco dealer, and we install what we sell at our shop in Cary, IL. Everything is priced at MSRP. Order online for in-store pickup, or stop by the counter, and we'll get it installed and tuned right the first time. \u003ca href=\"\/pages\/contact\"\u003eQuestions about your build? Talk to us.\u003c\/a\u003e\u003c\/p\u003e","brand":"Zapco","offers":[{"title":"Default Title","offer_id":52993130037479,"sku":"Z-ST200A AT","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/8093\/1047\/files\/Z-ST200A1_edb19f4c-af66-4f29-bb64-9c7834202823.jpg?v=1793863049"},{"product_id":"z-175-4-at","title":"Zapco Z-175.4 AT 4-Channel Class-AB Extreme SQ Competition Amplifier - Installed at Mediocre Customs, Cary IL","description":"\u003cp\u003e\u003cstrong\u003eInstalled at Mediocre Customs, Cary IL.\u003c\/strong\u003e We mount it, run power sized for it, and set gains with a meter at our shop in Cary, IL, so it makes its rated power without cooking your speakers.\u003c\/p\u003e\n\u003cp\u003eOver five years of success achieved by Team Zapco in major international competitions have driven Zapco to seek further performance improvements, thanks also to the new components available today. Maximum attention has been paid to the components used, from resistors and capacitors to OPs, without excluding other elements such as more accurate BIAS adjustment. A switch has also been added for use with unbalanced inputs, and the power has been increased.\u003c\/p\u003e\n\u003cp\u003eNew transformers, new capacitors, new high-power voltage regulators (so the amplifiers can operate at the maximum supply voltage, typically 14.4 volts, even with a flat battery), and new OPs, upgradeable, like in the Reference Series. Z-AT amplifiers offer the possibility of replacing the original OPs with even higher-performance OPs. This operation can be done quite easily, since the OPs are mounted on sockets and not soldered.\u003c\/p\u003e\n\u003cp\u003eThe Z-AT amplifiers share the same dimensions as the APs, allowing them to be used together; only the top plate is titanium-finished instead of gold.\u003c\/p\u003e\n\u003ch3\u003eBorn for Competitions\u003c\/h3\u003e\n\u003cp\u003eThe new Z-AT series is an evolution of the AP with the same goal: to satisfy customers who want to participate and win in Competitions. Competitions where everyone must be at the top, and where a single point of difference makes all the difference.\u003c\/p\u003e\n\u003ch3\u003eFeatures and Functions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4-Channel, Class-AB, Competition Audiophile Amplifier\u003c\/li\u003e\n\u003cli\u003eSignal to noise ratio of over 110dB\u003c\/li\u003e\n\u003cli\u003e0.1% resistors for lowest possible noise floor\u003c\/li\u003e\n\u003cli\u003eMUSE02 op-amps, socket-mounted\u003c\/li\u003e\n\u003cli\u003eBIAS current regulated to 100 mA for each channel\u003c\/li\u003e\n\u003cli\u003eBalanced\/Unbalanced Inputs\u003c\/li\u003e\n\u003cli\u003eExtremely low ESR caps throughout\u003c\/li\u003e\n\u003cli\u003eProprietary patented RCA connectors\u003c\/li\u003e\n\u003cli\u003ePass-through RCA outputs to daisy-chain multiple amplifiers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower @ 4Ω\u003c\/th\u003e\n\u003ctd\u003e4 x 175 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower @ 2Ω\u003c\/th\u003e\n\u003ctd\u003e4 x 300 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower @ 1Ω\u003c\/th\u003e\n\u003ctd\u003e4 x 450 watts*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower @ 4Ω Bridged\u003c\/th\u003e\n\u003ctd\u003e2 x 600 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTHD @ Rated Power\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 0.05%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal to Noise Ratio\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; 110dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFrequency Response\u003c\/th\u003e\n\u003ctd\u003e10Hz to 40,000Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput Sensitivity\u003c\/th\u003e\n\u003ctd\u003e1V to 9V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput Impedance\u003c\/th\u003e\n\u003ctd\u003e22KΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLow-Level RCA Channels\u003c\/th\u003e\n\u003ctd\u003e4 In + 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorking Voltage\u003c\/th\u003e\n\u003ctd\u003e9V ~ 16V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExternal Fuse (recommended)\u003c\/th\u003e\n\u003ctd\u003e200A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNet Dimensions (mm)\u003c\/th\u003e\n\u003ctd\u003e190(W) x 62(H) x 450(L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall Dimensions (mm)\u003c\/th\u003e\n\u003ctd\u003e190(W) x 62(H) x 478(L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eRMS power rated at 14.4V, THD \u0026lt; 1%. *1Ω rating with music signal and proper ventilation.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch2\u003eProfessional install at Mediocre Customs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAmp mounting on a rack, board or factory location\u003c\/li\u003e\n\u003cli\u003ePower and ground wire sized for the amp, fused at the battery\u003c\/li\u003e\n\u003cli\u003eSignal wiring from your radio or DSP\u003c\/li\u003e\n\u003cli\u003eGains set with a meter, crossovers set to your speakers\u003c\/li\u003e\n\u003cli\u003eCharging system check on high-power installs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTypical install time:\u003c\/strong\u003e 3–4 hours for the amp alone; plan a full day with speakers or subs\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVehicles we do this in:\u003c\/strong\u003e Daily drivers, trucks, Jeeps, hot rods and competition builds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuy online, pick up and install in store.\u003c\/strong\u003e \u003ca href=\"\/pages\/contact\"\u003eMessage us\u003c\/a\u003e to discuss your build and book your install.\u003c\/p\u003e\u003ch2\u003eQuestions we get in the shop\u003c\/h2\u003e\u003ch3\u003eCan I buy it online and have you install it?\u003c\/h3\u003e\u003cp\u003eYes. Order here, pick in-store pickup, and we hold it for your install day. You can also buy it at the counter.\u003c\/p\u003e\u003ch3\u003eWill my stock alternator keep up?\u003c\/h3\u003e\u003cp\u003eOn bigger amps we check your charging system first and tell you if you need a Big 3 or more.\u003c\/p\u003e\u003ch3\u003eCan it work with my factory radio?\u003c\/h3\u003e\u003cp\u003eUsually, with a line output converter or a DSP with speaker-level inputs. We'll tell you what your vehicle needs.\u003c\/p\u003e\u003ch2\u003eWhy buy from Mediocre Customs\u003c\/h2\u003e\u003cp\u003eWe're an authorized Zapco dealer, and we install what we sell at our shop in Cary, IL. Everything is priced at MSRP. Order online for in-store pickup, or stop by the counter, and we'll get it installed and tuned right the first time. \u003ca href=\"\/pages\/contact\"\u003eQuestions about your build? Talk to us.\u003c\/a\u003e\u003c\/p\u003e","brand":"Zapco","offers":[{"title":"Default Title","offer_id":52993137246439,"sku":"Z-175.4 AT","price":2039.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/8093\/1047\/files\/Z-175.4AT3.jpg?v=1793863135"},{"product_id":"z-350-2-at","title":"Zapco Z-350.2 AT 2-Channel Class-AB Extreme SQ Competition Amplifier - Installed at Mediocre Customs, Cary IL","description":"\u003cp\u003e\u003cstrong\u003eInstalled at Mediocre Customs, Cary IL.\u003c\/strong\u003e We mount it, run power sized for it, and set gains with a meter at our shop in Cary, IL, so it makes its rated power without cooking your speakers.\u003c\/p\u003e\n\u003cp\u003eOver five years of success achieved by Team Zapco in major international competitions have driven Zapco to seek further performance improvements, thanks also to the new components available today. Maximum attention has been paid to the components used, from resistors and capacitors to OPs, without excluding other elements such as more accurate BIAS adjustment. A switch has also been added for use with unbalanced inputs, and the power has been increased.\u003c\/p\u003e\n\u003cp\u003eNew transformers, new capacitors, new high-power voltage regulators (so the amplifiers can operate at the maximum supply voltage, typically 14.4 volts, even with a flat battery), and new OPs, upgradeable, like in the Reference Series. Z-AT amplifiers offer the possibility of replacing the original OPs with even higher-performance OPs. This operation can be done quite easily, since the OPs are mounted on sockets and not soldered.\u003c\/p\u003e\n\u003cp\u003eThe Z-AT amplifiers share the same dimensions as the APs, allowing them to be used together; only the top plate is titanium-finished instead of gold.\u003c\/p\u003e\n\u003ch3\u003eBorn for Competitions\u003c\/h3\u003e\n\u003cp\u003eThe new Z-AT series is an evolution of the AP with the same goal: to satisfy customers who want to participate and win in Competitions. Competitions where everyone must be at the top, and where a single point of difference makes all the difference.\u003c\/p\u003e\n\u003ch3\u003eFeatures and Functions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-Channel, Class-AB, Competition Audiophile Amplifier\u003c\/li\u003e\n\u003cli\u003eSignal to noise ratio of over 110dB\u003c\/li\u003e\n\u003cli\u003e0.1% resistors for lowest possible noise floor\u003c\/li\u003e\n\u003cli\u003eMUSE02 op-amps, socket-mounted\u003c\/li\u003e\n\u003cli\u003eBIAS current regulated to 100 mA for each channel\u003c\/li\u003e\n\u003cli\u003eBalanced\/Unbalanced Inputs\u003c\/li\u003e\n\u003cli\u003eExtremely low ESR caps throughout\u003c\/li\u003e\n\u003cli\u003eProprietary patented RCA connectors\u003c\/li\u003e\n\u003cli\u003ePass-through RCA outputs to daisy-chain multiple amplifiers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower @ 4Ω\u003c\/th\u003e\n\u003ctd\u003e2 x 350 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower @ 2Ω\u003c\/th\u003e\n\u003ctd\u003e2 x 600 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower @ 1Ω\u003c\/th\u003e\n\u003ctd\u003e2 x 900 watts*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower @ 4Ω Bridged\u003c\/th\u003e\n\u003ctd\u003e1 x 1200 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTHD @ Rated Power\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 0.05%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal to Noise Ratio\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; 110dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFrequency Response\u003c\/th\u003e\n\u003ctd\u003e10Hz to 40,000Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput Sensitivity\u003c\/th\u003e\n\u003ctd\u003e1V to 9V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput Impedance\u003c\/th\u003e\n\u003ctd\u003e22KΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLow-Level RCA Channels\u003c\/th\u003e\n\u003ctd\u003e2 In + 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorking Voltage\u003c\/th\u003e\n\u003ctd\u003e9V ~ 16V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExternal Fuse (recommended)\u003c\/th\u003e\n\u003ctd\u003e200A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNet Dimensions (mm)\u003c\/th\u003e\n\u003ctd\u003e190(W) x 62(H) x 450(L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall Dimensions (mm)\u003c\/th\u003e\n\u003ctd\u003e190(W) x 62(H) x 478(L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eRMS power rated at 14.4V, THD \u0026lt; 1%. *1Ω rating with music signal and proper ventilation.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch2\u003eProfessional install at Mediocre Customs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAmp mounting on a rack, board or factory location\u003c\/li\u003e\n\u003cli\u003ePower and ground wire sized for the amp, fused at the battery\u003c\/li\u003e\n\u003cli\u003eSignal wiring from your radio or DSP\u003c\/li\u003e\n\u003cli\u003eGains set with a meter, crossovers set to your speakers\u003c\/li\u003e\n\u003cli\u003eCharging system check on high-power installs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTypical install time:\u003c\/strong\u003e 3–4 hours for the amp alone; plan a full day with speakers or subs\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVehicles we do this in:\u003c\/strong\u003e Daily drivers, trucks, Jeeps, hot rods and competition builds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuy online, pick up and install in store.\u003c\/strong\u003e \u003ca href=\"\/pages\/contact\"\u003eMessage us\u003c\/a\u003e to discuss your build and book your install.\u003c\/p\u003e\u003ch2\u003eQuestions we get in the shop\u003c\/h2\u003e\u003ch3\u003eCan I buy it online and have you install it?\u003c\/h3\u003e\u003cp\u003eYes. Order here, pick in-store pickup, and we hold it for your install day. You can also buy it at the counter.\u003c\/p\u003e\u003ch3\u003eWill my stock alternator keep up?\u003c\/h3\u003e\u003cp\u003eOn bigger amps we check your charging system first and tell you if you need a Big 3 or more.\u003c\/p\u003e\u003ch3\u003eCan it work with my factory radio?\u003c\/h3\u003e\u003cp\u003eUsually, with a line output converter or a DSP with speaker-level inputs. We'll tell you what your vehicle needs.\u003c\/p\u003e\u003ch2\u003eWhy buy from Mediocre Customs\u003c\/h2\u003e\u003cp\u003eWe're an authorized Zapco dealer, and we install what we sell at our shop in Cary, IL. Everything is priced at MSRP. Order online for in-store pickup, or stop by the counter, and we'll get it installed and tuned right the first time. \u003ca href=\"\/pages\/contact\"\u003eQuestions about your build? Talk to us.\u003c\/a\u003e\u003c\/p\u003e","brand":"Zapco","offers":[{"title":"Default Title","offer_id":52993137311975,"sku":"Z-350.2 AT","price":1719.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/8093\/1047\/files\/Z-350.2AT4.jpg?v=1793863136"},{"product_id":"z-200-2-at","title":"Zapco Z-200.2 AT 2-Channel Class-AB Extreme SQ Competition Amplifier - Installed at Mediocre Customs, Cary IL","description":"\u003cp\u003e\u003cstrong\u003eInstalled at Mediocre Customs, Cary IL.\u003c\/strong\u003e We mount it, run power sized for it, and set gains with a meter at our shop in Cary, IL, so it makes its rated power without cooking your speakers.\u003c\/p\u003e\n\u003cp\u003eOver five years of success achieved by Team Zapco in major international competitions have driven Zapco to seek further performance improvements, thanks also to the new components available today. Maximum attention has been paid to the components used, from resistors and capacitors to OPs, without excluding other elements such as more accurate BIAS adjustment. A switch has also been added for use with unbalanced inputs, and the power has been increased.\u003c\/p\u003e\n\u003cp\u003eNew transformers, new capacitors, new high-power voltage regulators (so the amplifiers can operate at the maximum supply voltage, typically 14.4 volts, even with a flat battery), and new OPs, upgradeable, like in the Reference Series. Z-AT amplifiers offer the possibility of replacing the original OPs with even higher-performance OPs. This operation can be done quite easily, since the OPs are mounted on sockets and not soldered.\u003c\/p\u003e\n\u003cp\u003eThe Z-AT amplifiers share the same dimensions as the APs, allowing them to be used together; only the top plate is titanium-finished instead of gold.\u003c\/p\u003e\n\u003ch3\u003eBorn for Competitions\u003c\/h3\u003e\n\u003cp\u003eThe new Z-AT series is an evolution of the AP with the same goal: to satisfy customers who want to participate and win in Competitions. Competitions where everyone must be at the top, and where a single point of difference makes all the difference.\u003c\/p\u003e\n\u003ch3\u003eFeatures and Functions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-Channel, Class-AB, Competition Audiophile Amplifier\u003c\/li\u003e\n\u003cli\u003eSignal to noise ratio of over 110dB\u003c\/li\u003e\n\u003cli\u003e0.1% resistors for lowest possible noise floor\u003c\/li\u003e\n\u003cli\u003eMUSE02 op-amps, socket-mounted\u003c\/li\u003e\n\u003cli\u003eBIAS current regulated to 100 mA for each channel\u003c\/li\u003e\n\u003cli\u003eBalanced\/Unbalanced Inputs\u003c\/li\u003e\n\u003cli\u003eExtremely low ESR caps throughout\u003c\/li\u003e\n\u003cli\u003eProprietary patented RCA connectors\u003c\/li\u003e\n\u003cli\u003ePass-through RCA outputs to daisy-chain multiple amplifiers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower @ 4Ω\u003c\/th\u003e\n\u003ctd\u003e2 x 200 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower @ 2Ω\u003c\/th\u003e\n\u003ctd\u003e2 x 350 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower @ 1Ω\u003c\/th\u003e\n\u003ctd\u003e2 x 750 watts*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower @ 4Ω Bridged\u003c\/th\u003e\n\u003ctd\u003e1 x 700 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTHD @ Rated Power\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 0.05%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal to Noise Ratio\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; 110dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFrequency Response\u003c\/th\u003e\n\u003ctd\u003e10Hz to 40,000Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput Sensitivity\u003c\/th\u003e\n\u003ctd\u003e1V to 9V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput Impedance\u003c\/th\u003e\n\u003ctd\u003e22KΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLow-Level RCA Channels\u003c\/th\u003e\n\u003ctd\u003e2 In + 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorking Voltage\u003c\/th\u003e\n\u003ctd\u003e9V ~ 16V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExternal Fuse (recommended)\u003c\/th\u003e\n\u003ctd\u003e200A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNet Dimensions (mm)\u003c\/th\u003e\n\u003ctd\u003e190(W) x 62(H) x 450(L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall Dimensions (mm)\u003c\/th\u003e\n\u003ctd\u003e190(W) x 62(H) x 478(L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eRMS power rated at 14.4V, THD \u0026lt; 1%. *1Ω rating with music signal and proper ventilation.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch2\u003eProfessional install at Mediocre Customs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAmp mounting on a rack, board or factory location\u003c\/li\u003e\n\u003cli\u003ePower and ground wire sized for the amp, fused at the battery\u003c\/li\u003e\n\u003cli\u003eSignal wiring from your radio or DSP\u003c\/li\u003e\n\u003cli\u003eGains set with a meter, crossovers set to your speakers\u003c\/li\u003e\n\u003cli\u003eCharging system check on high-power installs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTypical install time:\u003c\/strong\u003e 3–4 hours for the amp alone; plan a full day with speakers or subs\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVehicles we do this in:\u003c\/strong\u003e Daily drivers, trucks, Jeeps, hot rods and competition builds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuy online, pick up and install in store.\u003c\/strong\u003e \u003ca href=\"\/pages\/contact\"\u003eMessage us\u003c\/a\u003e to discuss your build and book your install.\u003c\/p\u003e\u003ch2\u003eQuestions we get in the shop\u003c\/h2\u003e\u003ch3\u003eCan I buy it online and have you install it?\u003c\/h3\u003e\u003cp\u003eYes. Order here, pick in-store pickup, and we hold it for your install day. You can also buy it at the counter.\u003c\/p\u003e\u003ch3\u003eWill my stock alternator keep up?\u003c\/h3\u003e\u003cp\u003eOn bigger amps we check your charging system first and tell you if you need a Big 3 or more.\u003c\/p\u003e\u003ch3\u003eCan it work with my factory radio?\u003c\/h3\u003e\u003cp\u003eUsually, with a line output converter or a DSP with speaker-level inputs. We'll tell you what your vehicle needs.\u003c\/p\u003e\u003ch2\u003eWhy buy from Mediocre Customs\u003c\/h2\u003e\u003cp\u003eWe're an authorized Zapco dealer, and we install what we sell at our shop in Cary, IL. Everything is priced at MSRP. Order online for in-store pickup, or stop by the counter, and we'll get it installed and tuned right the first time. \u003ca href=\"\/pages\/contact\"\u003eQuestions about your build? Talk to us.\u003c\/a\u003e\u003c\/p\u003e","brand":"Zapco","offers":[{"title":"Default Title","offer_id":52993137344743,"sku":"Z-200.2 AT","price":1319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/8093\/1047\/files\/0bf3d1_84d5050434874e92b2bdadd5a9358ddb_mv2.png?v=1793863138"},{"product_id":"z-350-1-at","title":"Zapco Z-350.1 AT Mono Class-AB Extreme SQ Competition Amplifier - Installed at Mediocre Customs, Cary IL","description":"\u003cp\u003e\u003cstrong\u003eInstalled at Mediocre Customs, Cary IL.\u003c\/strong\u003e We mount it, run power sized for it, and set gains with a meter at our shop in Cary, IL, so it makes its rated power without cooking your speakers.\u003c\/p\u003e\n\u003cp\u003eOver five years of success achieved by Team Zapco in major international competitions have driven Zapco to seek further performance improvements, thanks also to the new components available today. Maximum attention has been paid to the components used, from resistors and capacitors to OPs, without excluding other elements such as more accurate BIAS adjustment. A switch has also been added for use with unbalanced inputs, and the power has been increased.\u003c\/p\u003e\n\u003cp\u003eNew transformers, new capacitors, new high-power voltage regulators (so the amplifiers can operate at the maximum supply voltage, typically 14.4 volts, even with a flat battery), and new OPs, upgradeable, like in the Reference Series. Z-AT amplifiers offer the possibility of replacing the original OPs with even higher-performance OPs. This operation can be done quite easily, since the OPs are mounted on sockets and not soldered.\u003c\/p\u003e\n\u003cp\u003eThe Z-AT amplifiers share the same dimensions as the APs, allowing them to be used together; only the top plate is titanium-finished instead of gold.\u003c\/p\u003e\n\u003ch3\u003eBorn for Competitions\u003c\/h3\u003e\n\u003cp\u003eThe new Z-AT series is an evolution of the AP with the same goal: to satisfy customers who want to participate and win in Competitions. Competitions where everyone must be at the top, and where a single point of difference makes all the difference.\u003c\/p\u003e\n\u003ch3\u003eFeatures and Functions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1-Channel, Class-AB, Competition Audiophile Amplifier\u003c\/li\u003e\n\u003cli\u003eSignal to noise ratio of over 110dB\u003c\/li\u003e\n\u003cli\u003e0.1% resistors for lowest possible noise floor\u003c\/li\u003e\n\u003cli\u003eMUSE02 op-amps, socket-mounted\u003c\/li\u003e\n\u003cli\u003eBIAS current regulated to 100 mA for each channel\u003c\/li\u003e\n\u003cli\u003eBalanced\/Unbalanced Inputs\u003c\/li\u003e\n\u003cli\u003eExtremely low ESR caps throughout\u003c\/li\u003e\n\u003cli\u003eProprietary patented RCA connectors\u003c\/li\u003e\n\u003cli\u003ePass-through RCA outputs to daisy-chain multiple amplifiers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower @ 4Ω\u003c\/th\u003e\n\u003ctd\u003e1 x 350 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower @ 2Ω\u003c\/th\u003e\n\u003ctd\u003e1 x 600 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower @ 1Ω\u003c\/th\u003e\n\u003ctd\u003e1 x 900 watts*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTHD @ Rated Power\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 0.05%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal to Noise Ratio\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; 110dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFrequency Response\u003c\/th\u003e\n\u003ctd\u003e10Hz to 40,000Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput Sensitivity\u003c\/th\u003e\n\u003ctd\u003e1V to 9V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput Impedance\u003c\/th\u003e\n\u003ctd\u003e22KΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLow-Level RCA Channels\u003c\/th\u003e\n\u003ctd\u003e2 In + 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorking Voltage\u003c\/th\u003e\n\u003ctd\u003e9V ~ 16V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFuse (included)\u003c\/th\u003e\n\u003ctd\u003e2 x 40A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExternal Fuse (recommended)\u003c\/th\u003e\n\u003ctd\u003e100A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNet Dimensions (mm)\u003c\/th\u003e\n\u003ctd\u003e190(W) x 62(H) x 300(L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall Dimensions (mm)\u003c\/th\u003e\n\u003ctd\u003e190(W) x 62(H) x 328(L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eRMS power rated at 14.4V, THD \u0026lt; 1%. *1Ω rating with music signal and proper ventilation.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch2\u003eProfessional install at Mediocre Customs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAmp mounting on a rack, board or factory location\u003c\/li\u003e\n\u003cli\u003ePower and ground wire sized for the amp, fused at the battery\u003c\/li\u003e\n\u003cli\u003eSignal wiring from your radio or DSP\u003c\/li\u003e\n\u003cli\u003eGains set with a meter, crossovers set to your speakers\u003c\/li\u003e\n\u003cli\u003eCharging system check on high-power installs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTypical install time:\u003c\/strong\u003e 3–4 hours for the amp alone; plan a full day with speakers or subs\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVehicles we do this in:\u003c\/strong\u003e Daily drivers, trucks, Jeeps, hot rods and competition builds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuy online, pick up and install in store.\u003c\/strong\u003e \u003ca href=\"\/pages\/contact\"\u003eMessage us\u003c\/a\u003e to discuss your build and book your install.\u003c\/p\u003e\u003ch2\u003eQuestions we get in the shop\u003c\/h2\u003e\u003ch3\u003eCan I buy it online and have you install it?\u003c\/h3\u003e\u003cp\u003eYes. Order here, pick in-store pickup, and we hold it for your install day. You can also buy it at the counter.\u003c\/p\u003e\u003ch3\u003eWill my stock alternator keep up?\u003c\/h3\u003e\u003cp\u003eOn bigger amps we check your charging system first and tell you if you need a Big 3 or more.\u003c\/p\u003e\u003ch3\u003eCan it work with my factory radio?\u003c\/h3\u003e\u003cp\u003eUsually, with a line output converter or a DSP with speaker-level inputs. We'll tell you what your vehicle needs.\u003c\/p\u003e\u003ch2\u003eWhy buy from Mediocre Customs\u003c\/h2\u003e\u003cp\u003eWe're an authorized Zapco dealer, and we install what we sell at our shop in Cary, IL. Everything is priced at MSRP. Order online for in-store pickup, or stop by the counter, and we'll get it installed and tuned right the first time. \u003ca href=\"\/pages\/contact\"\u003eQuestions about your build? Talk to us.\u003c\/a\u003e\u003c\/p\u003e","brand":"Zapco","offers":[{"title":"Default Title","offer_id":52993137377511,"sku":"Z-350.1 AT","price":1219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/8093\/1047\/files\/Z-350.1AT4.jpg?v=1793863138"},{"product_id":"z-200-1-at","title":"Zapco Z-200.1 AT Mono Class-AB Extreme SQ Competition Amplifier - Installed at Mediocre Customs, Cary IL","description":"\u003cp\u003e\u003cstrong\u003eInstalled at Mediocre Customs, Cary IL.\u003c\/strong\u003e We mount it, run power sized for it, and set gains with a meter at our shop in Cary, IL, so it makes its rated power without cooking your speakers.\u003c\/p\u003e\n\u003cp\u003eOver five years of success achieved by Team Zapco in major international competitions have driven Zapco to seek further performance improvements, thanks also to the new components available today. Maximum attention has been paid to the components used, from resistors and capacitors to OPs, without excluding other elements such as more accurate BIAS adjustment. A switch has also been added for use with unbalanced inputs, and the power has been increased.\u003c\/p\u003e\n\u003cp\u003eNew transformers, new capacitors, new high-power voltage regulators (so the amplifiers can operate at the maximum supply voltage, typically 14.4 volts, even with a flat battery), and new OPs, upgradeable, like in the Reference Series. Z-AT amplifiers offer the possibility of replacing the original OPs with even higher-performance OPs. This operation can be done quite easily, since the OPs are mounted on sockets and not soldered.\u003c\/p\u003e\n\u003cp\u003eThe Z-AT amplifiers share the same dimensions as the APs, allowing them to be used together; only the top plate is titanium-finished instead of gold.\u003c\/p\u003e\n\u003ch3\u003eBorn for Competitions\u003c\/h3\u003e\n\u003cp\u003eThe new Z-AT series is an evolution of the AP with the same goal: to satisfy customers who want to participate and win in Competitions. Competitions where everyone must be at the top, and where a single point of difference makes all the difference.\u003c\/p\u003e\n\u003ch3\u003eFeatures and Functions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1-Channel, Class-AB, Competition Audiophile Amplifier\u003c\/li\u003e\n\u003cli\u003eSignal to noise ratio of over 110dB\u003c\/li\u003e\n\u003cli\u003e0.1% resistors for lowest possible noise floor\u003c\/li\u003e\n\u003cli\u003eMUSE02 op-amps, socket-mounted\u003c\/li\u003e\n\u003cli\u003eBIAS current regulated to 100 mA for each channel\u003c\/li\u003e\n\u003cli\u003eBalanced\/Unbalanced Inputs\u003c\/li\u003e\n\u003cli\u003eExtremely low ESR caps throughout\u003c\/li\u003e\n\u003cli\u003eProprietary patented RCA connectors\u003c\/li\u003e\n\u003cli\u003ePass-through RCA outputs to daisy-chain multiple amplifiers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower @ 4Ω\u003c\/th\u003e\n\u003ctd\u003e1 x 200 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower @ 2Ω\u003c\/th\u003e\n\u003ctd\u003e1 x 350 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower @ 1Ω\u003c\/th\u003e\n\u003ctd\u003e1 x 750 watts*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTHD @ Rated Power\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 0.05%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal to Noise Ratio\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; 110dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFrequency Response\u003c\/th\u003e\n\u003ctd\u003e10Hz to 40,000Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput Sensitivity\u003c\/th\u003e\n\u003ctd\u003e1V to 9V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput Impedance\u003c\/th\u003e\n\u003ctd\u003e22KΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLow-Level RCA Channels\u003c\/th\u003e\n\u003ctd\u003e2 In + 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorking Voltage\u003c\/th\u003e\n\u003ctd\u003e9V ~ 16V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFuse (included)\u003c\/th\u003e\n\u003ctd\u003e2 x 30A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExternal Fuse (recommended)\u003c\/th\u003e\n\u003ctd\u003e100A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNet Dimensions (mm)\u003c\/th\u003e\n\u003ctd\u003e190(W) x 62(H) x 300(L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall Dimensions (mm)\u003c\/th\u003e\n\u003ctd\u003e190(W) x 62(H) x 328(L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eRMS power rated at 14.4V, THD \u0026lt; 1%. *1Ω rating with music signal and proper ventilation.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch2\u003eProfessional install at Mediocre Customs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAmp mounting on a rack, board or factory location\u003c\/li\u003e\n\u003cli\u003ePower and ground wire sized for the amp, fused at the battery\u003c\/li\u003e\n\u003cli\u003eSignal wiring from your radio or DSP\u003c\/li\u003e\n\u003cli\u003eGains set with a meter, crossovers set to your speakers\u003c\/li\u003e\n\u003cli\u003eCharging system check on high-power installs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTypical install time:\u003c\/strong\u003e 3–4 hours for the amp alone; plan a full day with speakers or subs\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVehicles we do this in:\u003c\/strong\u003e Daily drivers, trucks, Jeeps, hot rods and competition builds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuy online, pick up and install in store.\u003c\/strong\u003e \u003ca href=\"\/pages\/contact\"\u003eMessage us\u003c\/a\u003e to discuss your build and book your install.\u003c\/p\u003e\u003ch2\u003eQuestions we get in the shop\u003c\/h2\u003e\u003ch3\u003eCan I buy it online and have you install it?\u003c\/h3\u003e\u003cp\u003eYes. Order here, pick in-store pickup, and we hold it for your install day. You can also buy it at the counter.\u003c\/p\u003e\u003ch3\u003eWill my stock alternator keep up?\u003c\/h3\u003e\u003cp\u003eOn bigger amps we check your charging system first and tell you if you need a Big 3 or more.\u003c\/p\u003e\u003ch3\u003eCan it work with my factory radio?\u003c\/h3\u003e\u003cp\u003eUsually, with a line output converter or a DSP with speaker-level inputs. We'll tell you what your vehicle needs.\u003c\/p\u003e\u003ch2\u003eWhy buy from Mediocre Customs\u003c\/h2\u003e\u003cp\u003eWe're an authorized Zapco dealer, and we install what we sell at our shop in Cary, IL. Everything is priced at MSRP. Order online for in-store pickup, or stop by the counter, and we'll get it installed and tuned right the first time. \u003ca href=\"\/pages\/contact\"\u003eQuestions about your build? Talk to us.\u003c\/a\u003e\u003c\/p\u003e","brand":"Zapco","offers":[{"title":"Default Title","offer_id":52993137410279,"sku":"Z-200.1 AT","price":919.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/8093\/1047\/files\/0bf3d1_ae9b78b0752f467eb1334a9dac0addd2_mv2.png?v=1793863140"}],"url":"https:\/\/www.mediocrecustoms.com\/collections\/zapco-z-at-series.oembed","provider":"Mediocre Customs","version":"1.0","type":"link"}